A 3D printer company in Italy has designed and printed a hundred life saving respirator valves in twenty four hours for a hospital that had run out of them.

For accurate and up to date information on coronavirus please go to gov.uk/coronavirus. If you’re outside the UK please see the information on coronavirus from your national and local authorities.

The valve connects patients in intensive care to breathing machines.

The hospital, in Brescia, had two hundred and fifty coronavirus patients in intensive care and the valves are designed to be used for a maximum of eight hours at a time.

The 3D printed version cost less than €1 each to produce and the prototype took three hours to design.

Italian journalist Nunzia Vallini put the hospital in touch with Isinnova chief executive Cristian Fracassi after discovering the original supplier was unable to supply new valves quickly.

He and mechanical engineer Alessandro Romaioli raced there to see the valve for themselves, and three hours later, returned with a prototype.

Alessandro Romaioli told BBC News “They tested it on a patient and they told us that it worked well and so we ran again back to our office and we started to print new valves,” .

The pair then joined forces with Lonati, another local 3D printer company, to meet the demand, since Isinnova has six printers and the devices take about an hour each to print.

They are working for free, but they do not plan to release the design publicly.

Cristian Fracassi said “The valve has very thin holes and tubes, smaller than 0.8m – it’s not easy to print the pieces.

“Plus you have to respect not [contaminating] the product – really it should be produced in a clinical way.”

Nevertheless, a second hospital had now got in touch, requesting more valves.

Cristian Fracassi said “We haven’t slept for two days.

“We’re trying to save lives.”